Seri KP1000 adalah pengontrol program digital berukuran 96x96mm dengan akurasi indikasi ±0,1%, siklus kontrol sekitar 0,1 detik dan maksimum 19 pola program (maksimum 19 langkah/pola).
Berbagai fungsi termasuk tampilan layar pola program keseluruhan dan input universal disediakan sebagai standar.
Detail Produk
Sinyal masukan
Masukan universal
Mode kontrol (Keluaran No.1)
PID tipe servo ON-OFF (Spesifikasi beban standar)
Mode kontrol (Keluaran No.2)
Tidak ada
Antarmuka komunikasi
Keluaran sinyal transmisi
Input drive eksternal
Penyegelan panel dan penutup terminal
Warna casing
Abu-abu
Tegangan catu daya
Tegangan 100-240V (AC)
Fitur
Layar 5 digit yang besar dan mudah dilihat
Pengendalian yang luar biasa
Operabilitas mewarisi model sebelumnya
Output sinyal transmisi presisi tinggi
Jenis tegangan catu daya 24V disediakan
Pola program
Tampilan kemajuan pola yang mudah diidentifikasi
Masukan universal
Tersedia 2 warna casing
Sesuai dengan standar keselamatan internasional dan arahan Eropa (CE)
Sesuai dengan ROHS
Spesifikasi
Input Signal: Thermocouple: B, R, S, K, E, J, T etc., DC voltage: ±10mV, ±20mV, ±50mV, ±100mV, ±5V, ±10V, DC current: 20mA, Resistance thermometer: Pt100, JPt100 etc.
Accuracy Rating: ±0.1%±1digit of input span
Reference Junction Compensation
Accuracy: K, E, J, T, N, Platinel II・・・±0.5°C or ±20μV equivalent value whichever greater Others・・・±1.0°C or ±40μV equivalent value whichever greater
Sampling Cycle: Approx. 0.1sec.
Burnout: High limit burn out is standard provision for thermocouple, DC voltage (±50mV or lower), and resistance thermometer (3-wire). At burnout, output value of Output 1/ Output 2 can be set freely
Rated Power Supply Voltage: General specifications 100 to 240V AC, 24V power supply specifications 24VAC/24VDC
Weight: Without option, Approx. 450g with option, Approx. 580g
Output Type: Current output type, ON-OFF pulse type, voltage output type, SSR drive pulse type, ON-OFF servo type
Controller Set Value: PID 8types, P:0 to 999.9% (If it is 0, it acts as 2-position control type), I:0 to 9999 sec. (If it is 0, no integral action), D:0 to 9999sec., High limit･･･0.0 to 100.0%, Low limit･･･-100.0 to 0.0%
ON-OFF Pulse Type: Output signal: ON-OFF pulse
continuity signal Contact capacity: Resistance
load 100 to 240VAC 30VDC, 5A or lower, Inductive load 100 to 240VAC 30VDC, 2.5A
or lower, Minimum load 5VDC 10mA or lower
ON-OFF Servo Type: Output signal: ON-OFF servo continuity signal, Contact capacity: Resistance load 100 to 240VAC 30VDC, 5A or lower, Inductive load 100 to 240VAC 30VDC, 2.5A
or lower, Minimum load 5VDC 10mA or higher
Current Output Type: Output signal: 4 to 20mA DC, Load resistance: 750Ωor lower
SSR Drive Pulse Type: Output signal: ON-OFF pulse voltage signal, Output voltage: ON voltage 12VDC±20% OFF voltage 0.8VDC or lower
Voltage Output Type: Output signal: 0 to 10V, Output impedance: Approx. 10Ω, Load resistance: 50kΩor higher
Alarm Point: 4 points
Setting Unit
Output Signal: Analog output 4 to 20mADC, 0 to 1VDC, 0 to 10VDC Digital output RS-422A, RS-485
Output Update Cycle: Analog output 0.1sec.
Digital output: Approx. 1sec.
Accuracy Rating: ±0.1% of span
Resolution: Approx. 1/30000
Output Impedance: Approx.10Ω
Load Current: Current output 400Ω or lower, Voltage output 50kΩ or higher
