ข้ามไปยังข้อมูลสินค้า
1 จาก 1

Infrared Multi Analyzer - IRMA1100S

Infrared Multi Analyzer - IRMA1100S

ราคาปกติ 558,600.00 ฿
ราคาปกติ ราคาโปรโมชัน 558,600.00 ฿
ลดราคา ขายหมดแล้ว
ขอใบเสนอราคา

IRMA1100S – เครื่องวัดความชื้นอินฟราเรด (แบบกระจก)

IRMA1100S เป็นเครื่องวัดความชื้นอินฟราเรดแบบทั่วไป ใช้หลักการ สะท้อนอินฟราเรด (แบบกระจก) สำหรับการวัดความชื้นแบบไม่สัมผัสและเรียลไทม์
เหมาะสำหรับกระบวนการผลิตหลากหลายประเภท มอบความแม่นยำสูง การตอบสนองรวดเร็ว และประสิทธิภาพการวัดที่เสถียร

รายละเอียดสินค้า
รุ่นสินค้า IRMA1100S
ประเภท ความชื้นทั่วไป (ชนิดกระจก)
ช่วงการวัด 1–30% H₂O
จำนวนความยาวคลื่น 3 ช่วง
ระยะการวัด/เส้นผ่านศูนย์กลาง 300 มม. ±100 มม. / 50 มม.Φ
เวลาตอบสนอง 28 มิลลิวินาที
เอาท์พุต / การสื่อสาร RS-485 (มาตรฐาน)
ป้องกันการระเบิด Exd II BT5

 

 

 

 

 

 

 

การใช้งาน:
เหมาะสำหรับการวัดความชื้นในกระบวนการต่าง ๆ เช่น:

  • ผง (เช่น เคมีภัณฑ์, ส่วนผสมอาหาร)
  • เส้นใย (เช่น กระดาษ, สิ่งทอ)
  • อนุภาค (เช่น ชิ้นไม้, ดิน, RDF)
  • ของเหลว (เช่น สารละลาย, slurry)

ซอฟต์แวร์:
มาพร้อมซอฟต์แวร์สำหรับ Windows 10 สำหรับจัดการและวิเคราะห์ข้อมูลได้อย่างง่ายดาย

  • แสดงโปรไฟล์ข้อมูล
  • บันทึกและจัดเก็บข้อมูล
  • แปลงไฟล์เป็น CSV
  • จัดการประเภทผลิตภัณฑ์
  • สร้างกราฟเส้นการสอบเทียบ (Calibration Curve)
  • สามารถเชื่อมต่อ สูงสุด 3 ตัวตรวจจับกับคอมพิวเตอร์เครื่องเดียว

 

คุณสมบัติ

  • ความยาวคลื่นสูงสุด 10 ความยาวคลื่น สามารถวัดองค์ประกอบ 4 อย่างได้พร้อมกันแบบเรียลไทม์ เช่น ความชื้น ความหนาของฟิล์ม สิ่งมีชีวิต และความหนาของสารเคลือบ
  • การเชื่อมต่อกับอินเทอร์เฟซหลายตัว RS485 (MODBUS), Ethernet (LAN)
  • ความเร็วสูงและความสามารถในการทำซ้ำสูง (28ms)
  • ฟังก์ชันการคำนวณหลายรายการ
  • ฟังก์ชั่นการวินิจฉัยตนเอง บำรุงรักษาง่าย
  • มาตรฐาน CE

ข้อมูลเฉพาะ

Measuring method: Infrared absorption type

Measuring wavelengths: Up to 10 wavelengths

Measuring component: Up to 4 constituents

Light source: Tungsten lamp

Measurement distance/diameter (Mirror type): 200 to 400 mm, 50 x 50 mm□

Analog output: 4 to 20mA DC, ±0.2% FS (load resistance 500Ω or less)

Communications: RS-485 (MODBUS)

Output renewal cycle: 28ms

Display /Settings: Display data & setup parameter Parameters are configurable by key

Calibration curve: Linear, quadratic, cubic & multiple regression line

Calibration curve correction: Linear & quadratic correction

Number of calibration curve: 99 (maximum)

Computation Function: 2-color, 3-color ratio computation, multiple regression computation

Color density computation (moisture /thickness (color density meter only)

Smoothing (delay): 0 to 9.9 seconds, 10 to 99 seconds (can selectable)

Calibration: By checking plate

Self-diagnostic function: When self-diagnostic abnormality occurs, contact and communication output

Correction input function: External 4 to 20mA DC (1 input) corrects measurement data (sample temperature correction, etc.)

Contact Input/Output:  Contact input (Di) preset,
data hold, real/smooth switching can be selected by contact input.

contact output (Do) outputs the selected function, either self-diagnostic function (1b) or higher and lower limit alarm (1a)

Operating temperature limit: 0 to 50°C (air cooling required for temperatures above 45°C. However, the air must be dry instrument air with a temperature of approximately 30°C or less.)

Power supply: 24V DC (supplied from power supply unit IR-WEP. Power supply unit: 100-240V AC, 47 450Hz)

Power consumption: Approx. 30VA

Connection: Terminal connection

Case: Aluminum castings

Weight : Approx 4.3kg

Installation Method: Bolt suspension method with 4 pieces of M8 bolts

CE marking: CE marking compliant, EMC directive EN61326+A

ดูรายละเอียดทั้งหมด