Infrared Multi Analyzer - IRGME3* Setting Display

Input signal: RS485, up to 9 detectors connectable

Analog output: 4 to 20 mA DC, 3 output (Load resistance: output 1, 2: Less than 600Ω, 3: Less than 400Ω)

(Component 1 of detector no.1 to 3 is outputted for multi head)

Communications: RS232C(standard), RS422A or
RS485(option)

Output renewal cycle: 28ms x detector number

Display:

1. Measured data, LED 5 digit

2. Detector No., component No., calibration curve

No., parameter setup (Component No. is displayed for
detector multicomponent meter)

Detector No. setup: Detector No. 1 to 9 is key
configurable

Component No. setup: Component No. 1 to 4 is key configurable (Depending on the detector)

Calibration curve No. setup: Calibration curve No. is
key configurable for each of detector No. also configurable by external contact

Smoothing time: Smoothing time setting at smoothing
calculation

T=0.0 to 9.9, 10 to 99 seconds

Calibration function: Perform calibration by key
operation or by external contact in use of checking plate

Hold / preset: Hold or preset the display and output
by key

operation or by external contact

Calibration curve correction: Online correction of
calibration curve linear and quadratic correction

External setup: Detector No., component No.,
calibration curve No., calibration, hold or preset

Alarm function: High/low limit alarm individual contact output (a contact, common) beyond setting range

Self-diagnostic: Outputs contact signal(1b) when abnormal condition

Case material: Flame retardant polycarbonate

Working ambient: 0 to 50℃

Mounting: Panel-mount type

Weight: Approx. 0.6kg

Power supply: 100 to 240V AC 50/60Hz, Power
consumption Max. 20VA

CE-standards: EN61326-1:2006, Emission: Class A, Immunity: Table 2

• IM Series (ENG)
• IM Moisture Meter (JP)
• IM Thickness Meter (JP)
• IM Liquid Densitometer (JP)
• Moisture/Thickness Selection Guide (JP)