Card Loggers - MR5320 Series
Card Loggers - MR5320 Series
MR5320 Splash Proof Type Two-channel Card Logger
MR5320 is 2 ch type card logger of MR5300 and 6,000 data can be stored for a channel. Temperature sensor is only built in for channel 1. Data recalling and setting are also available on PC
Products |
Models |
Specifications |
Logger |
MR5320 |
|
External Sensor |
MR9301 |
-40°C to 60°C |
MR9302 |
0°C to100°C |
|
MR9303 |
50°C to150°C |
Features
Features
- Number of logging data is 6,000 data each for channels.
- Measurement interval can be selected between 10 to 50sec. and 1 to 60min
- ±0.5°C (between -5to 50°C) of high accuracy
- Logging data can be stored even in dead battery
- Dust tight and splash proof structure, so it is washable (IP64). Conform to the CE marking safety standard of Europe
- Various external sensors: general type, waterproof type, and needle type etc. are available
Specifications
Specifications
Measuring Range: -40 to 60°C, 0 to 100°C, 50 to 150°C (Ranges are automatically switched by identifying a sensor to be used.) *Only channel 1 has built-in sensor, measuring range is -20 to 55°C
Accuracy Rating: ±0.5°C ±1digit (in a range of -5 to
50°C) *±1.0°C ±1digit of other than above.
Input Point: 2 points
Number of Logging Data: 6000 data for each channel
Temperature Sensor: Built-in (channel 1 only)/External sensor switching
*Various external sensors (sold separately): general type, waterproof tube, needle type and surface temperature measuring type etc. are
available.
Display Contents (Each channel):
Current data=Month, day, hour, minute and measuring
temperature
Recalling data=Highest, and lowest temperatures in logging period, and average temperature in the logger
Setting parameter=High and low limit alarm set values.
Operation Available in the Logger: Display start-up
(with auto-off function: Display goes out after one minute when no operation is performed.)
Display content selection (clock setting, logging
start/stop, keylock set/release)
*Three function keys of DISP, SEL, and REC.
Communication Function:
Communication with an exclusive data reader (sold
separately) through near-infrared radiation.
Parameter setting, and recalling logger data and logging condition by exclusive analysis software.
Setting in PC (Dedicated Analysis Software): Clock,
logging start time/stop time (for logging interval unit: min.), measurement/logging interval (10 to 50 sec. or 1 to 60min.), high/low limit alarm temperatures, keylock of the logger, and logging method (automatic stop/endless)
Power Supply: Alkaline battery R03 (AAA), 2pcs
External Dimensions/Weight: W54×H110×D20.5mm, approx. 95g (including batteries)
Specifications Sheet Download
Specifications Sheet Download
