DP2000G Graphic Program Controller
DP2000G Graphic Program Controller
広域制御用グラフィック形プログラム調節計 DP2000G
DP2000Gは、制御領域を低域、高域の2つに分割し、領域の切換点で自動的に切り換えを行う広域制御用のグラフィック形のプログラム調節計です。
調節モード(第1出力) |
モデル |
オンオフパルス形 |
DP2110G000-G10 |
オンオフサーボ形(標準負荷仕様) |
DP2120G000-G10 |
電流出力形 |
DP2130G000-G10 |
SSR駆動パルス形 |
DP2150G000-G10 |
電圧出力形(一般タイプ) |
DP2160G000-G10 |
オンオフサーボ形(微小負荷仕様) |
DP2180G000-G10 |
電流出力形(高精度タイプ) |
DP21A0G000-G10 |
電流出力形(高精度タイプ) |
DP21B0G000-G10 |
電圧出力形(高精度タイプ) |
DP21C0G000-G10 |
特長
特長
Graphic program controller for wide-area control with a large 5.6-inch color LCD display
- The DP2000G is a graphic program controller for wide-area control that divides control range into two, low and high ranges, and automatically switches at the range switching point. By using the optimal sensor for each range, it is possible to perform precise and stable control from low to high ranges. control range switching is performed automatically and bumplessly, allowing for smooth switching without disturbance.
- The easy-to-read color LCD display various data such as program pattern in an easy-to-understand manner.
- In addition to the all-at-once display, various monitor display screens are available, including enlarged numeric display, bar graph display, and trend display.
- Easy to use with Japanese setting menu
- 28 contact outputs, 16 contact inputs, analog transmission output (option), and communication interface (option) are available, making system construction easy.
- Parameter editing software for PC is included as standard.
仕様
仕様
入力点数:2点 (低温側入力および高温側入力)
入力信号:
熱電対:B、R、S、K、E、J、Tなど
直流電圧:±10mV、±20mV、±50mV、±100mV、±5V、±10V
直流電流:20mA
測温抵抗体:Pt100、JPt100など
精度定格:入力スパンの±0.1%±1digit(基準動作条件において)
※別途精度定格の詳細規定あり
基準点補償精度:K、E、J、T、N、PlatineⅡ・・・±0.5℃以下、上記以外・・・±1.0℃以下
サンプリング周期:約0.1秒
バーンアウト:熱電対、直流電圧(±50mV以下)、測温抵抗体でバーンアウトを標準装備
定格電源電圧:100~240V AC 50/60Hz(フリー電源)
質量:約1.7kg
出力形式:電流出力形、オンオフパルス形、電圧出力形、SSR駆動パルス形
調節設定値 :PID8種
P:0~999.9%(0の場合は2位置式動作)
I:0~9999秒(0は無限大)
D:0~9999秒
オンオフパルス形
出力信号: オンオフパルス導通信号
接点容量: 抵抗負荷 100~240VAC / 30VDC、5A以下
誘導負荷 100~240VAC / 30VDC、2.5A以下
オンオフサーボ形
出力信号: オンオフサーボ導通信号
接点容量: 標準負荷仕様・・・
抵抗負荷 100~240VAC / 30VDC、5A以下
誘導負荷 100~240VAC / 30VDC、2.5A以下
微小負荷仕様・・・
抵抗負荷 100~240VAC / 30VDC、20mA以下
誘導負荷 100~240VAC / 30VDC、20mA以下
電流出力形
出力信号:4~20mA DCまたは1~5mA
負荷抵抗:750Ω以下
SSR駆動 パルス形
出力信号: オンオフパルス電圧信号
出力電圧: ON電圧 12VDC±20%
OFF電圧 0.8VDC以下
電圧出力形
出力信号:0~10V
出力インピーダンス:約10Ω
警報点数:4点+4点(拡張割付設定)
資料ダウンロード
資料ダウンロード
