Why Do Pyrometers Read Low? Test Smoke, Sight-Glass & Small Target Effects with Our 2-Color Thermometer Simulator | CHINO IR-CZ
In high-temperature industrial processes (800°C and above)—such as steel forging, induction heating (IH), melting furnaces, and advanced material sintering—engineers frequently face critical temperature measurement issues: infrared pyrometers (radiation thermometers) reading 100°C+ lower than actual temperatures or fluctuating wildly when workpieces vibrate.
CHINO Corporation (Thailand) Ltd. (CCT) has officially launched the "IR-CZ Series Interactive Radiation Thermometer Simulator," allowing you to visually test optical physics and verify the optimal wavelength and 2-Color ratio thermometer (IR-CZQ / IR-CZH) for your production line in 30 seconds.

▼ Launch the Interactive IR-CZ Simulator (Free / No Login Required):
▶ https://chinothailand.com/en-th/pages/interactive-ir-cz-simulator
3 Physical Traps That Cause Standard Infrared Pyrometers to Read Low
While non-contact infrared thermometers offer ultra-fast response, standard 1-Color (single-wavelength) sensors suffer from severe measurement errors under real-world factory conditions. Our interactive simulator lets you experience these three optical phenomena firsthand:
Trap 1: Partial Spot Coverage (Target Smaller Than Spot Size / Misalignment)
As measuring distance increases, the optical spot diameter (φ) of a thermometer expands (e.g., at distance ratio L/D = 200, a 1,000mm distance creates a φ5.0mm spot). When measuring thin wires, small billets, or vibrating parts that do not completely fill the circular spot, a 1-color pyrometer averages the cold background—causing the displayed temperature to plummet.
Trap 2: Optical Attenuation from Smoke, Steam, Dust & Wire Mesh
Heavy furnace smoke, oil mist, cooling steam, scale, or protective wire mesh shields block infrared energy. A 1-color sensor misinterprets this energy loss as a temperature drop. In contrast, CHINO's 2-Color Ratio Thermometers (IR-CZQ / IR-CZH) calculate the radiant energy ratio between two wavelengths (0.9µm and 1.55µm), automatically canceling out optical attenuation and locking onto the true temperature—provided sufficient radiant energy is received (subject to target surface condition).
Trap 3: Sight-Glass Wavelength Absorption (Quartz Glass vs. Soda-Lime Glass)
Measuring through a vacuum or atmosphere furnace observation window (sight glass) requires strict wavelength selection. Standard mid-to-long-wavelength pyrometers (2.0µm and above) cannot see through glass—resulting in immediate Underflow (UFL) errors due to infrared absorption by the glass itself. Use "Step 7" in the simulator to test how short-wavelength models transmit cleanly through quartz or soda-lime sight ports.
7 Interactive Steps You Can Test on the Web Simulator
- Step 1 Target Material & Emissivity (ε): Simulate different materials including Steel (0.70), Stainless Steel / Aluminum (0.25), and Carbon (0.95).
- Step 2 Workpiece Size & Optical Alignment: Drag small, medium, or large targets with your mouse to test partial spot coverage inside the direct viewfinder reticle.
- Step 3 Temperature Range (0–2800°C) & Step 4 Model Comparison: One-click comparison between standard 1-color sensors and CHINO's 2-color models (IR-CZQ / IR-CZH).
- Step 5 Emissivity Slope & Signal Modulation (PEAK / DELAY): Verify high-speed response using "PEAK Hold" to capture fast-moving or vibrating billets on conveyors.
- Step 6 Measuring Distance (500–5000mm) & Step 7 Environmental Disturbances: Test signal attenuation caused by smoke, steam, quartz/soda-lime glass windows, and wire mesh screens.
*For Narrow Spaces & High Electromagnetic Noise (IH Coils): Where a standard thermometer body cannot fit or near high-frequency induction heating coils, CHINO also offers the flexible fiber-optic 2-color thermometer "IR-FA Series."
[Thailand Only / ≥800°C Processes] Book a 1-Hour Witnessed Optical Evaluation
After testing your line parameters on the simulator, click the consultation button at the bottom of the tool to automatically forward your setup to our engineering team for model selection or quotation.
For high-temperature applications (800°C and above) in Thailand (EEC and nationwide), CCT sales engineers provide a maximum 1-hour witnessed on-site optical and spot verification test using actual IR-CZ or fiber-optic IR-FA demonstration units.
*Note: Standalone equipment loans or unmonitored leave-behind testing are strictly prohibited. For applications below 800°C or across ASEAN (Vietnam, Indonesia, Malaysia, Philippines, Singapore), our engineers provide rapid online model selection and quotations within 2 business day.
▼ Launch Interactive IR-CZ Simulator:
▶ https://chinothailand.com/en-th/pages/interactive-ir-cz-simulator
▼ Request Model Selection / Quotation / 1-Hr Onsite Evaluation:
▶ Contact CHINO Thailand Engineering Team